Optional Extras for Economy Sheds
Optional Extras & Image Pictures For The Forest Economy Sheds & Garden Stores
|
||
Stable DoorA split opening shed door, allowing the bottom half to be closed with the top half open, excellent for ventilation. |
||
|
||
Double DoorsTo replace the standard single door and provide up to a 5ft wide opening, enabling larger objects to be put into the shed. |
||
|
||
Heavy Duty Two-Tier Timber Work BenchStandard workbenches are 2’6’’ wide x the length required. The benches are often tailor made to fit the layout of the shed. |
||
|
||
Internal Timber ShelvesStandard shelves are 8’’ wide x the length required. The shelves are often tailor made to fit the layout of the building. |
||
|
||
Allowance for Omitting the Standard Timber FloorA pressure treated perimeter timber base plinth is supplied with all buildings, which do not have a timber floor to prevent the building from having direct ground contact. |
||
|
||
Shed Site Assembly onto a Prepared BaseAssembly of the shed or garden store onto an existing or specially prepared base, including felting the roof and glazing the windows. |
||
|
||
Pressure Treated Floor Bearers3’’ x 2’’ pressure treated floor bearers are strongly recommended to level the shed or garden store floor onto an existing or specially laid concrete base, paved patio or decking area, to raise the building by approximately 2’’ to allow for air circulation under the floor and to prevent any part of the building from having direct ground contact. The bearers usually run in the shortest dimension. The floor/joists of the building are secured to the bearers. |
||
|
||
Mixture of Bricks, Blocks & PackingA mixture of loosely laid bricks, blocks and packing are used to level and support the floor bearers at 4ft intervals onto an existing fairly level soil or lawn site, where no base has been specially prepared. This method can only be used providing the slope of the proposed site is no more than 16’’. |
||
|
||
Perimeter Base Gravel BoardsPressure treated gravel boards are cut to size and fitted around the perimeter of the floor to disguise the brick/block packing used to level and support the bearers onto a sloping site. |
||
|
||
Reinforced Concrete BaseA 4’’ - 6’’ thick reinforced concrete base is laid to the external base dimensions of the shed. The quoted prices allow for up to a 9’’ fall in the ground. The site will be dug out as required to enable the lowest side of the base to be slightly sunk into the ground and finished just above the existing ground level. All spoils dug out for the base will be removed from site. Additional costing’s are available to quotation for sites which slope more than 9’’. |
||
|
||
Two Coats of Cuprinol or Sovereign SX70 Wood Preservative or StainAs a budget wood stain or preservative we offer two coats of Cuprinol decorative preserver, Cuprinol Shades stain or Sovereign SX70 stain onto all external timber surfaces of the shed prior to delivery to enable the preservative or stain to be applied to areas which can not be protected once the building has been constructed. The preservative or stain is applied directly onto the already pressure treated timber. The Cuprinol Shades wood stain is available in approximately 20 different opaque colours and the Cuprinol preservative and SX70 are available in approximately 6 different translucent colours. |
||
|
||
Guttering & DownpipesBlack round guttering and a downpipe can be fitted to each side of the roof eaves. The quoted price is for one side of the roof only. |
||
|